Skip to main content
Deutsch

Search

SOREX SMART WiFi Wall Reader with RFID, Smartphone, Pin Code & Fingerprint

Avatar
SOREX wireless Solutions
  • Updated

In this article

DOWNLOAD_ICON_-_PDF.png

 

1. Scope of delivery

The following ingredients are included:

2. Technical Data

Article Number

WT102000 (without Fingerprint) & WT102020 (with Fingerprint)

EAN

0685717261274 & 0685717261250

Operating temperature

-20° to 60°C

Operating humidity

15%RH to 90%RH

Power consumption

1A

Standby power consumption

15mA

Protection class

IP66

Frequency

2,4 GHz

Storage of user data (Fingerprint, RFID, Codes, Handy)

Permanent (auch bei Stromausfall)

Number of media

200 RFID-Media

150 Pincodes

1000 Fingerprints (Model with fingerprint)

Unlimited eKeys (Smartphone-user)

Power supply

12V DC, min. 0,5A

 

3. Installation and wiring

 

blobid2.png

Note: If there is a connector at the end of the cable bundle, you must cut it off before you can wire the product.

 

3.1 Wiring diagram for e-opener

Verkabelungsplan_f_r_e_ffner.png

 

3.2 Wiring diagram for Fuhr motor lock

Fuhr_Motorschloss.png

3.3 Wiring diagram for Winkhaus motor lock

winkhaus_lock.png

 

3.4 Wiring diagram for GU-BKS A-opener

gu_motorschloss.png

 

3.5 Wiring diagram for e-lock & door bell

Anschlussplan_Wandleser_mit_Klinger_und_T_r_ffner_V2.png

4. Smartphone App

Search for the SOREX SmartLock app in the Google Play Store or Apple Store and install it.

 

mceclip0.pngmceclip1.png

 

You can find instructions for the SOREX SmartLock app here.

 

5. Reset to factory settings

You can reset the wall reader in two different ways:

  1. Delete the wall reader from the app (select wall reader -> settings -> "Delete")
    or
  2. Unscrew the plate at the back and press the button inside for approx. 3 seconds until two signal tones are played in quick succession.

Related articles