SOREX   

codepad basic / max lite

Operating instructions

Contents

1. Package contents

2. Technical specifications

3. Installing the batteries

4. Initial setup

4.1 Activating configuration mode

4.2 Connecting the keypad

4.3 Creating a passcode

4.4 Medium

4.5 Registering a fingerprint

4.6 Deleting the keypad

5. Resetting

1. Package contents

The package contains:

1. codepad basic / codepad max lite

2. 4 * AAA batteries

3. 2 screws, used to fix it to the door 4. 3M adhesive, used to fix it to the door

2. Technical specifications

3. Installing the batteries

 First unscrew the screw on the bottom of the unit, then open the cover plate.

 Put the device into operation by inserting 4 AAA batteries. The device should now emit a beep. Then replace the rear cover and tighten the screw.

4. Initial setup

4.1 Activating configuration mode

To assign the wireless keypad to a lock, first go to the desired lock in the SOREX SmartLock app, which will later be unlocked using the keypad.

Then go to Settings → “Wireless keypad”. A new keypad can be added by pressing the  
“Add keypad” button at the bottom.

To allow the wireless keypad to be detected by the mobile phone, press any key, then click “Next” when the indicator flashes.

If this is not the case, please tap “The indicator is not flashing” and select “Multifunctional keypad”, enter “*529#” or press the reset button. After entering the code, the LED key “2468” should now flash white. Then click “Next”.

Caution: *After pressing the reset button, the locks that have been added to the keypad will be deleted.  

                 *Bluetooth must be switched on and the smartphone must be 
                 within Bluetooth range of the keypad in order to find the device.

                 *A lock can only have one keypad added, and one keypad can be added to three locks. 
                 

4.2 Connecting the keypad

 You can now select your keypad and give it a name. Confirm with “OK”.

The keypad is now connected to the selected lock and can open it using all the passcodes you have created. To open the lock, hold a card against the reader or enter a valid code and then press Unlock.

Note: The lock can also be locked by pressing and holding the Unlock button. 
Caution: Please also note that the wireless keypad should be within Bluetooth range of the lock.

The keypad is now displayed on the selected lock under Settings → “Wireless keypad”.  
The current battery status of the keypad is also displayed.

4.3 Creating a passcode

To generate a numerical code / PIN, first click “Pincode” on the home page of the desired lock and then “Generate pincode”.

Several options are then available for generating a PIN. In the “Permanent” section, a random numerical code is generated and displayed after entering a name. In addition, in the “Custom” section you can create your own 4–9-digit combination of numbers.

4.4 Medium

To add an RFID card, first click “Medium” on the home page of the desired lock and then “Add medium”.

Now enter the user’s name and press “OK”. Place the RFID card on the number pad as soon as the app prompts you to do so. The RFID card has now been added successfully.

4.5 Deleting the keypad

To delete a keypad assigned to a lock, first click “Settings” on the lock’s home page and then “Wireless keypad”.

Now select the wireless keypad that you want to remove from the lock. Enter  “*529#” on the keypad, then press “Delete” when the keys “2468” are flashing.

5. Adding additional locks

5.1 Admin password

You can connect up to 3 locks to one codepad basic / max lite.
To do this, you must first set an admin password.

Select the lock that has already been added and press “Settings”.

Then press “Basics”.

Your current admin password is displayed here.

It can also be changed here if necessary.

5.2 Adding locks

To add another lock, follow the instructions in sections 4.1 and 4.2, with one exception.
Enter the following on the codepad basic / max lite to activate configuration mode:

“X529 admin password”

The codepad basic / max lite emits a short acoustic signal when successful.

The next lock can then be added normally via the app.

6. Resetting

You can reset the SOREX codepad basic / max lite as follows:

1.Delete the codepad basic / max lite from the app (Select Lock -> Settings -> 
Wireless keypad -> Delete). You must be within range of the unit to do this. or

2.Press the reset button on the interior unit for approximately 3 seconds or until two beeps are played in  
quick succession.

Note:As the password and card are stored in the lock, the original password and card can be used when adding another keypad. Therefore, you must remove the password and card from the lock.